Sprenger BAVARIA T3 mechanical hand lever press clearing press assembly press BJ 2005 The Sprenger BAVARIA T3 mechanical clearing press is in good used condition, vlil functional, cleaned and ready for immediate use. The visual condition can be seen in the attached pictures and videos. An inspection and detailed examination of the purchased item, is expressly desired after consultation. Especially suitable to execute keyways with push broaches rationally and cleanly. Of course, it can also be used for all other relevant work in an ideal manner, such as the pressing in and out of bushings and bolts, or e.g. the mounting of pretensioned assemblies. The machine base is of very stable and torsion-resistant welded construction. The shape and the cross-section are designed in such a way that all occurring operating loads are safely absorbed. The drive is provided by a 5-spoke handwheel via a planetary gear to the drive spindle. Due to the large gear ratio, only a small amount of force is required at the handwheel. The guide of the square work spindle is equipped with adjustable gibs. Cross-section of the adjustable work spindle: square 40 mm location hole in the work spindle: Ø 20 H7 max. spindle movement: 450 mm table surface: 280 x 220 mm diameter of the rotating table: 230 mm base area: 500 x 280 mm height with extended work spindle: 1450 mm paint: light gray RAL 7035

Schmidt 22 pneumatic press complete on frame The Schmidt 22 pneumatic press is in good used condition, vlil functional, cleaned and ready for immediate use. The optical condition can be seen in the attached pictures and videos. An inspection and detailed examination of the purchased item, is expressly desired by arrangement.