Precise and robust electro-pneumatic / semi-automatic hot stamping machine with a maximum stamping pressure of 5 t (0 - 50 kN), a stamping area of 480 x 250 mm, a stamping temperature of 0 - 250 °C The PMF 335 hot stamping machine is in good used condition, fully functional, cleaned and ready for immediate use. The optical condition can be seen in the attached pictures and videos. An inspection and detailed examination of the purchased item, is expressly desired after consultation. When it comes to hot stamping small and medium runs, the PMF 335 offers a solution that is as compact as it is convenient. The electro-pneumatic / semi-automatic hot stamping press is particularly suitable for stamping business cards and promotional gifts made of wood, plastic or plastic, such as pocket calendars, napkins and cases. The PMF 335 is extremely easy to operate and impresses with its versatile range of accessories, which can also meet individual embossing requirements in a practical way. The embossing machine is as universal as a Swiss army knife and can be used quickly and easily for many different embossing tasks. With its precise and robust construction, it is designed for samples, small and medium series, mechanically very stable, flexible to set up and easy to handle. It is equipped with a 480 x 480 mm embossing surface and has a maximum embossing pressure of 5 t (0 - 50 kN). The operating temperature can be continuously adjusted between 0 - 250 °C by means of the electronic temperature control unit.

Precise and robust manually operated hot stamping machine with a maximum stamping pressure of 800 kg (0 - 8 kN), a stamping plate of 75 x 120 mm incl. cliché holding plate 75 x 130 mm, temperature control unit 0 - 350 °C, 5-digit piece counter, height measuring scale, with extendable work table of 200 x 260 mm as well as an automatic foil feeding device The Gierlich P800 hot stamping press is in good used condition, fully functional, cleaned and ready for immediate use. The optical condition can be seen in the attached pictures and videos. An inspection and detailed examination of the purchased item, is expressly desired by arrangement. When it comes to hot stamping small and medium runs, the P-800 offers a solution that is as compact as it is convenient. The manually operated foil hot stamping press is particularly suitable for stamping business cards and promotional gifts made of wood, plastic or plastic, such as pocket calendars, napkins and cases. The P-800 is extremely easy to operate and impresses with its versatile range of accessories, which can also be used to meet individual embossing requirements. The embossing machine is as universal as a Swiss army knife and can be used quickly and easily for many different embossing tasks. With its precise and robust construction, it is designed for samples, small and medium series, mechanically very stable, flexible to set up and easy to handle. It is equipped with a 75 x 120 mm embossing plate and has a maximum embossing pressure of 800 kg (0 - 8 kN). A large 75 x 130 mm mounting plate is included in the scope of delivery for immediate startup. The operating temperature can be continuously adjusted between 0 - 350 °C using the electronic temperature control unit. The setting scale, with the scale division of 0 - 100 line, serves merely as a mnemonic scale for a determined setting and does not indicate percentage values or even temperature measurement. The temperature of the heating head can be taken from the mounted bimetal thermometer. Due to the automatic foil feeding device, it can be used for foil stamping as well as for blind stamping. The foil feed is designed for a foil width of max. 90 mm whereby the foil transport length can be set between 10 and 130 mm. The embossing machine is equipped with an extendable work table of 200 x 260 mm and has an extension of 130 mm.

Precise and robust manually operated hot stamping machine incl. cliché holding plate with a maximum stamping pressure of 800 kg (0 - 8 kN), a stamping plate of 70 x 90 mm, temperature control unit 0 - 400 °C, 5-digit piece counter, with extendable work table of 230 x 220 mm as well as an automatic foil feeding device The Baier Geba 1/A hot stamping press is in good used condition, fully functional, cleaned and ready for immediate use. The optical condition can be seen in the attached pictures and videos. An inspection and detailed examination of the purchased item, is expressly desired by arrangement. When it comes to hot stamping small and medium runs, the GEBA 1/A offers a solution that is as compact as it is convenient. The manually operated foil hot stamping press is particularly suitable for stamping business cards and promotional gifts made of wood, plastic or plastic, such as pocket calendars, napkins and cases. The BAIER GEBA 1/A is extremely easy to operate and impresses with its versatile range of accessories, which can also be used to meet individual embossing requirements. The embossing machine is as universal as a Swiss army knife and can be used quickly and easily for many different embossing tasks. With its precise and robust construction, it is designed for samples, small and medium series, mechanically very stable, flexible to set up and easy to handle. It is equipped with a 70 × 90 mm embossing plate and has a maximum embossing pressure of 800 kg (0 - 8 kN). A cliché holding plate is included in the scope of delivery. The operating temperature can be continuously adjusted between 0 - 400 °C by means of the electronic temperature control unit. Due to the automatic foil feeding device, it can be used for foil stamping as well as blind stamping. The embossing machine is equipped with a 230 × 220 mm work table that can be moved in all directions and has a throat depth of 110 mm and an insert height of 0 - 180 mm.

Precise and robust manually operated hot stamping machine incl. cliché holding plate with a maximum stamping pressure of 800 kg (0 - 8 kN), a stamping plate of 70 x 90 mm, temperature control unit 0 - 400 °C, 5-digit piece counter, with extendable work table of 230 x 220 mm as well as an automatic foil feeding device The Baier Geba 1/A hot stamping press is in good used condition, fully functional, cleaned and ready for immediate use. The optical condition can be seen in the attached pictures and videos. An inspection and detailed examination of the purchased item, is expressly desired by arrangement. When it comes to hot stamping small and medium runs, the GEBA 1/A offers a solution that is as compact as it is convenient. The manually operated foil hot stamping press is particularly suitable for stamping business cards and promotional gifts made of wood, plastic or plastic, such as pocket calendars, napkins and cases. The BAIER GEBA 1/A is extremely easy to operate and impresses with its versatile range of accessories, which can also be used to meet individual embossing requirements. The embossing machine is as universal as a Swiss army knife and can be used quickly and easily for many different embossing tasks. With its precise and robust construction, it is designed for samples, small and medium series, mechanically very stable, flexible to set up and easy to handle. It is equipped with a 70 × 90 mm embossing plate and has a maximum embossing pressure of 800 kg (0 - 8 kN). A cliché holding plate is included in the scope of delivery. The operating temperature can be continuously adjusted between 0 - 400 °C by means of the electronic temperature control unit. Due to the automatic foil feeding device, it can be used for foil stamping as well as blind stamping. The embossing machine is equipped with a 230 × 220 mm work table that can be moved in all directions and has a throat depth of 110 mm and an insert height of 0 - 180 mm.

Precise and robust manually operated hot stamping machine with a maximum stamping pressure of 800 kg (0 - 8 kN), a stamping plate of 75 x 120 mm incl. cliché holding plate 75 x 130 mm, temperature control unit 0 - 350 °C, 5-digit piece counter, height measuring scale, with extendable working table of 200 x 260 mm as well as an automatic foil feeding device The Gierlich P800 hot stamping press is in good used condition, fully functional, cleaned and ready for immediate use. The optical condition can be seen in the attached pictures and videos. An inspection and detailed examination of the purchased item, is expressly desired by arrangement. When it comes to hot stamping small and medium runs, the P-800 offers a solution that is as compact as it is convenient. The manually operated foil hot stamping press is particularly suitable for stamping business cards and promotional gifts made of wood, plastic or plastic, such as pocket calendars, napkins and cases. The P-800 is extremely easy to operate and impresses with its versatile range of accessories, which can also be used to meet individual embossing requirements. The embossing machine is as universal as a Swiss army knife and can be used quickly and easily for many different embossing tasks. With its precise and robust construction, it is designed for samples, small and medium series, is mechanically very stable, can be set up flexibly and is easy to handle. It is equipped with a 75 x 120 mm embossing plate and has a maximum embossing pressure of 800 kg (0 - 8 kN). For immediate start-up, a large cliché holding plate of 75 x 130 mm placement area is included in the scope of delivery. The operating temperature can be continuously adjusted between 0 - 350 °C by means of the electronic temperature control unit. The setting scale, with the scale division of 0 - 100 dash, serves only as a mnemonic scale for a determined setting and does not give any percentage values or even temperature measurement. The temperature of the heating head can be taken from the mounted bimetal thermometer. Due to the automatic foil feeding device, it can be used for foil stamping as well as for blind stamping. The foil feed is designed for a foil width of max. 90 mm whereby the foil transport length can be adjusted between 10 and 130 mm. The embossing machine is equipped with an extendable work table of 200 x 260 mm and has an extension width of 130 mm.

Pneumatic knee lever hot stamping machine with a maximum stamping pressure of 5 t (0 - 50 kN), a stamping area of 140 x 100 mm, with electronic stamping temperature control 0 - 400 °C, automatic sliding table, automatic foil feed, height adjustment of the stamping head and fine stroke adjustment via spindle The WSK 889 pneumatic hot stamping machine is in good used condition, fully functional, cleaned and ready for immediate use. The optical condition can be seen in the attached pictures and videos. An inspection and detailed examination of the purchased item, is expressly desired after consultation. When it comes to hot stamping small and medium runs, the WSK 889 offers a solution that is as compact as it is convenient. The electro-pneumatic / semi-automatic hot stamping press is particularly suitable for stamping business cards and promotional gifts made of wood, plastic or plastic, such as pocket calendars, napkins and cases. The WSK 889 is extremely easy to operate and impresses with its versatile range of accessories, which can also meet individual embossing requirements in a practical way. The embossing machine is as universal as a Swiss army knife and can be used quickly and easily for many different embossing tasks. With its precise and robust construction, it is designed for samples, small and medium series, mechanically very stable, flexible to set up and easy to handle. It is equipped with a 140 x 100 mm embossing surface and has a maximum embossing pressure of 5 t (0 - 50 kN). The operating temperature can be continuously adjusted between 0 - 400 °C using the electronic temperature control unit. The embossing time control can be continuously adjusted from O - 3 sec. or from O - 9 sec. via a switchable toggle switch. The hot stamping machine is triggered via a foot switch. It has an automatic sliding table with precise carriage guidance, a support surface of 360 x 250 mm, two index pins for attaching feed plates (templates) and a pneumatic clamping holder for the embossed material. Foil embossing can be realized by means of the automatic foil feed together with a brake gear motor with a continuously adjustable length feed via time relay, up to a foil width of 160 mm. C-body knee lever pressure system Embossing time control O - 3 sec. switchable to O - 9 sec. via toggle switch Automatic foil feed by means of brake gear motor Automatic sliding table with precise slide guide Rough, simple adjustment of the upper part of the embossing machine in the range of approx. 60 mm End position fine adjustment in the range of approx. 20 mm by means of a spindle on the stably mounted embossing table Triggering via foot switch Pneumatic leading safety device Pulse counter 6 digits

Precise and robust manually operated hot stamping machine with a maximum stamping pressure of 800 kg (0 - 8 kN), a stamping plate of 75 x 120 mm incl. cliché holding plate 75 x 130 mm, temperature control unit 0 - 350 °C, 5-digit piece counter, height measuring scale, with extendable work table of 200 x 260 mm as well as an automatic foil feeding device The Gierlich P800 hot stamping press is in good used condition, fully functional, cleaned and ready for immediate use. The optical condition can be seen in the attached pictures and videos. An inspection and detailed examination of the purchased item, is expressly desired by arrangement. When it comes to hot stamping small and medium runs, the P-800 offers a solution that is as compact as it is convenient. The manually operated foil hot stamping press is particularly suitable for stamping business cards and promotional gifts made of wood, plastic or plastic, such as pocket calendars, napkins and cases. The P-800 is extremely easy to operate and impresses with its versatile range of accessories, which can also be used to meet individual embossing requirements. The embossing machine is as universal as a Swiss army knife and can be used quickly and easily for many different embossing tasks. With its precise and robust construction, it is designed for samples, small and medium series, mechanically very stable, flexible to set up and easy to handle. It is equipped with a 75 x 120 mm embossing plate and has a maximum embossing pressure of 800 kg (0 - 8 kN). A large 75 x 130 mm mounting plate is included in the scope of delivery for immediate startup. The operating temperature can be continuously adjusted between 0 - 350 °C using the electronic temperature control unit. The setting scale, with the scale division of 0 - 100 line, serves merely as a mnemonic scale for a determined setting and does not indicate percentage values or even temperature measurement. The temperature of the heating head can be taken from the mounted bimetal thermometer. Due to the automatic foil feeding device, it can be used for foil stamping as well as for blind stamping. The foil feed is designed for a foil width of max. 90 mm whereby the foil transport length can be set between 10 and 130 mm. The embossing machine is equipped with an extendable work table of 200 x 260 mm and has an extension of 130 mm.

Precise and robust manually operated hot stamping machine with a maximum stamping pressure of 600 kg (0 - 6 kN), a stamping plate of 70 x 90 mm, with a large work table of 620 x 620 mm and a manual foil feeding device. The BAIER hot stamping machine is both technically and visually in a good used condition, is fully functional and ready for immediate use. The optical condition can be seen in the pictures. The GEBA 1/F is the ideal machine for craft bookbinders or sample makers. It can be used to emboss short runs quickly and easily. Photographers and artists who want to emboss their works can also solve this task well with the GEBA 1/F. The embossing machine is as universal as a Swiss army knife and can be used quickly and easily for many different embossing tasks. With its precise and robust construction, it is designed for samples, small and medium series, mechanically very stable, flexible to set up and easy to handle. It is equipped with a 70 x 90 mm embossing plate and has a maximum embossing pressure of 600 kg (0 - 6 kN). A plate holding plate or clamping frame must be retrofitted as required and are not included in the scope of delivery. The operating temperature can be set between 0 - 400 °C using the temperature control unit. Due to the manual foil feeding device, it can be used for foil stamping as well as blind stamping. The embossing machine is equipped with a large work table of 620 x 620 mm and has a projection of 320 mm and an insert height of 0 - 96 mm.

Precise and robust manually operated hot stamping machine incl. cliché holding plate with a maximum stamping pressure of 800 kg (0 - 8 kN), a stamping plate of 70 x 90 mm, temperature control unit 0 - 400 °C, 5-digit piece counter, with extendable work table of 230 x 220 mm as well as an automatic foil feeding device The Baier Geba 1/A hot stamping press is in good used condition, fully functional, cleaned and ready for immediate use. The optical condition can be seen in the attached pictures and videos. An inspection and detailed examination of the purchased item, is expressly desired by arrangement. When it comes to hot stamping small and medium runs, the GEBA 1/A offers a solution that is as compact as it is convenient. The manually operated foil hot stamping press is particularly suitable for stamping business cards and promotional gifts made of wood, plastic or plastic, such as pocket calendars, napkins and cases. The BAIER GEBA 1/A is extremely easy to operate and impresses with its versatile range of accessories, which can also be used to meet individual embossing requirements. The embossing machine is as universal as a Swiss army knife and can be used quickly and easily for many different embossing tasks. With its precise and robust construction, it is designed for samples, small and medium series, mechanically very stable, flexible to set up and easy to handle. It is equipped with a 70 × 90 mm embossing plate and has a maximum embossing pressure of 800 kg (0 - 8 kN). A cliché holding plate is included in the scope of delivery. The operating temperature can be continuously adjusted between 0 - 400 °C by means of the electronic temperature control unit. Due to the automatic foil feeding device, it can be used for foil stamping as well as blind stamping. The embossing machine is equipped with a 230 × 220 mm work table that can be moved in all directions and has a throat depth of 110 mm and an insert height of 0 - 180 mm.

Precise and robust manually operated hot stamping machine with a maximum stamping pressure of 800 kg (0 - 8 kN), a stamping plate of 75 x 120 mm incl. closing frame 75 x 130 mm, temperature control unit 0 - 350 °C, 5-digit piece counter, height measuring scale, with extendable work table of 200 x 260 mm as well as an automatic foil feeding device The Gierlich P800 hot stamping press is in good used condition, fully functional, cleaned and ready for immediate use. The optical condition can be seen in the attached pictures and videos. An inspection and detailed examination of the purchased item, is expressly desired by arrangement. When it comes to hot stamping small and medium runs, the P-800 offers a solution that is as compact as it is convenient. The manually operated foil hot stamping press is particularly suitable for stamping business cards and promotional gifts made of wood, plastic or plastic, such as pocket calendars, napkins and cases. The P-800 is extremely easy to operate and impresses with its versatile range of accessories, which can also be used to meet individual embossing requirements. The embossing machine is as universal as a Swiss army knife and can be used quickly and easily for many different embossing tasks. With its precise and robust construction, it is designed for samples, small and medium series, mechanically very stable, flexible to set up and easy to handle. It is equipped with a 75 x 120 mm embossing plate and has a maximum embossing pressure of 800 kg (0 - 8 kN). For immediate commissioning, a large clamping frame of 75 x 130 mm mounting surface is included in the scope of delivery. The operating temperature can be continuously adjusted between 0 - 350 °C using the electronic temperature control unit. The setting scale, with the scale division of 0 - 100 line, serves merely as a mnemonic scale for a determined setting and does not indicate percentage values or even temperature measurement. The temperature of the heating head can be taken from the mounted bimetal thermometer. Due to the automatic foil feeding device, it can be used for foil stamping as well as for blind stamping. The foil feed is designed for a foil width of max. 90 mm whereby the foil transport length can be set between 10 and 130 mm. The embossing machine is equipped with an extendable work table of 200 x 260 mm and has an extension of 130 mm.

Precise and robust manually operated hot stamping machine with a maximum stamping pressure of 600 kg (0 - 6 kN), a stamping plate of 70 x 90 mm, temperature control unit, 5-digit piece counter, height measuring scale and automatic foil feeding device The BAIER hot stamping machine is both technically and optically in a good used condition, is fully functional and ready for immediate use. The model GEBA 1 is a universal, manually operated machine with toggle lever transmission, which is used in leather processing, in the plastics sector and by promotional article manufacturers. The small embossing machine is as universal as a Swiss Army knife and can be used quickly and easily for many different embossing tasks. With its precise and robust construction, it is designed for samples, small and medium series, mechanically very stable, flexible to set up and easy to handle. It is equipped with a 70 x 90 mm embossing plate and has a maximum embossing pressure of 600 kg (0 - 6 kN). A plate holding plate or clamping frame must be retrofitted as required and are not included in the scope of delivery. The operating temperature can be set between 0 - 400 °C using the temperature control unit. Due to the automatic foil feeding device, it can be used for foil stamping as well as for blind stamping. The embossing machine is equipped with a working surface of 190 x 190 mm and an insert height of 0 - 130 mm.

Precise and robust manually operated hot stamping machine incl. cliché holding plate with a maximum stamping pressure of 800 kg (0 - 8 kN), a stamping plate of 70 x 90 mm, temperature control unit 0 - 400 °C, 5-digit piece counter, with extendable work table of 230 x 220 mm as well as an automatic foil feeding device The Baier Geba 1/A hot stamping press is in good used condition, fully functional, cleaned and ready for immediate use. The optical condition can be seen in the attached pictures and videos. An inspection and detailed examination of the purchased item, is expressly desired by arrangement. When it comes to hot stamping small and medium runs, the GEBA 1/A offers a solution that is as compact as it is convenient. The manually operated foil hot stamping press is particularly suitable for stamping business cards and promotional gifts made of wood, plastic or plastic, such as pocket calendars, napkins and cases. The BAIER GEBA 1/A is extremely easy to operate and impresses with its versatile range of accessories, which can also be used to meet individual embossing requirements. The embossing machine is as universal as a Swiss army knife and can be used quickly and easily for many different embossing tasks. With its precise and robust construction, it is designed for samples, small and medium series, mechanically very stable, flexible to set up and easy to handle. It is equipped with a 70 × 90 mm embossing plate and has a maximum embossing pressure of 800 kg (0 - 8 kN). A cliché holding plate is included in the scope of delivery. The operating temperature can be continuously adjusted between 0 - 400 °C by means of the electronic temperature control unit. Due to the automatic foil feeding device, it can be used for foil stamping as well as blind stamping. The embossing machine is equipped with a 230 × 220 mm work table that can be moved in all directions and has a throat depth of 110 mm and an insert height of 0 - 180 mm.

Precise and robust manually operated hot stamping machine with a maximum stamping pressure of 800 kg (0 - 8 kN), a stamping plate of 75 x 120 mm incl. cliché holding plate 75 x 130 mm, temperature control unit 0 - 350 °C, 5-digit piece counter, height measuring scale, with extendable working table of 200 x 260 mm as well as an automatic foil feeding device The Gierlich P800 hot stamping press is in good used condition, fully functional, cleaned and ready for immediate use. The optical condition can be seen in the attached pictures and videos. An inspection and detailed examination of the purchased item, is expressly desired by arrangement. When it comes to hot stamping small and medium runs, the P-800 offers a solution that is as compact as it is convenient. The manually operated foil hot stamping press is particularly suitable for stamping business cards and promotional gifts made of wood, plastic or plastic, such as pocket calendars, napkins and cases. The P-800 is extremely easy to operate and impresses with its versatile range of accessories, which can also be used to meet individual embossing requirements. The embossing machine is as universal as a Swiss army knife and can be used quickly and easily for many different embossing tasks. With its precise and robust construction, it is designed for samples, small and medium series, is mechanically very stable, can be set up flexibly and is easy to handle. It is equipped with a 75 x 120 mm embossing plate and has a maximum embossing pressure of 800 kg (0 - 8 kN). For immediate start-up, a large cliché holding plate of 75 x 130 mm placement area is included in the scope of delivery. The operating temperature can be continuously adjusted between 0 - 350 °C by means of the electronic temperature control unit. The setting scale, with the scale division of 0 - 100 dash, serves only as a mnemonic scale for a determined setting and does not give any percentage values or even temperature measurement. The temperature of the heating head can be taken from the mounted bimetal thermometer. Due to the automatic foil feeding device, it can be used for foil stamping as well as for blind stamping. The foil feed is designed for a foil width of max. 90 mm whereby the foil transport length can be adjusted between 10 and 130 mm. The embossing machine is equipped with an extendable work table of 200 x 260 mm and has an extension width of 130 mm.

Precise and robust manually operated hot stamping machine incl. cliché holding plate with a maximum stamping pressure of 800 kg (0 - 8 kN), a stamping plate of 70 x 90 mm, temperature control unit 0 - 400 °C, 5-digit piece counter, with extendable work table of 230 x 220 mm as well as an automatic foil feeding device The Baier Geba 1/A hot stamping press is in good used condition, fully functional, cleaned and ready for immediate use. The optical condition can be seen in the attached pictures and videos. An inspection and detailed examination of the purchased item, is expressly desired by arrangement. When it comes to hot stamping small and medium runs, the GEBA 1/A offers a solution that is as compact as it is convenient. The manually operated foil hot stamping press is particularly suitable for stamping business cards and promotional gifts made of wood, plastic or plastic, such as pocket calendars, napkins and cases. The BAIER GEBA 1/A is extremely easy to operate and impresses with its versatile range of accessories, which can also be used to meet individual embossing requirements. The embossing machine is as universal as a Swiss army knife and can be used quickly and easily for many different embossing tasks. With its precise and robust construction, it is designed for samples, small and medium series, mechanically very stable, flexible to set up and easy to handle. It is equipped with a 70 × 90 mm embossing plate and has a maximum embossing pressure of 800 kg (0 - 8 kN). A cliché holding plate is included in the scope of delivery. The operating temperature can be continuously adjusted between 0 - 400 °C by means of the electronic temperature control unit. Due to the automatic foil feeding device, it can be used for foil stamping as well as blind stamping. The embossing machine is equipped with a 230 × 220 mm work table that can be moved in all directions and has a throat depth of 110 mm and an insert height of 0 - 180 mm.